Tips For Replacing a Window Handle
It is easy to change your window handle from the at-home comforts of your home. Use these helpful tips to ensure an easy operation and a beautiful look.
Take off the screw covers from your uPVC handle to expose the screws. Measure upvc door handles repairmywindowsanddoors to make sure you're getting the right size replacement.
1. Take a measurement of the length of the Spindle.
If you're replacing a window handle, it's important to determine the dimensions of the spindle correct. It could influence the tightness or looseness of the handle as well as whether the handle will lock correctly into the frame of the window. The spindle is the metal shaft that connects to the handle and to the lock within the window frame. The spindle could be a standard 8mm cross-section in the industry or the earlier 9mm versions. The current industry standard is 8mm however this wasn't always the case. When buying a new handle it is important to check the measurements.
Take the handle off. This can be done easily by turning the handle in the open position, then unwinding two screws that hold the handle in place (which are often hidden behind plastic caps which will need to removed). Once the handle has been removed, take a measurement from the base to the point at which it ends. This will give you the measurement needed to purchase a new one.
There are many options when you're looking to select the perfect window handle. From sleek chrome that can fit into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curled mongoose-tail latches. The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are generally installed to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, from 58mm up to 62mm. Cadenza window handles are a different size because they feature an angled blade that operates an interlocking mechanism that is multi-point inside the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline Espag handles can be used for left or right-handed windows. Cranked window handles are hand-operated and can only be used on windows that open in one direction.
2. Take the handle off
Whether the handle is damaged or simply worn out, a window handle that is shattered can be very frustrating. The good news is, you can repair the uPVC handle by yourself. You only need a few basic hand tools and time to complete the task.
You will need to first open the window, and ensure that it is not locked. Then, remove the screw caps that hold the handle in place. After the screw caps are removed you will be able to remove the handle.
The handle itself is attached to a spindle in the window frame. Based on the type, this is held in place either by a screw or a pin. The most popular handles are the inline Espagnolette and cockspur handles. Both of these kinds of handles are used on casement windows, including windows made of aluminium. They can be locked using keys to stop unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.
To take the handle off, you'll need a screwdriver with a flat blade to release the clip holding the handle. After the clip has been released, the handle should be able to slide off the spindle. Once the handle that was previously used is removed, you'll need to determine the length of the spindle and ensure that the new handle will fit.
Once you have decided on the proper size for the handle, you can screw it into place. It is essential to make sure that the handle is securely attached and that it rotates in the correct direction (clockwise when the handle is open or counterclockwise if the handle is closed). It is important to make sure that the handle hasn't been installed upside down.
Replace the cap screws. After you have completed this step, you should test the handle to be sure it is working correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked and then back.
3. Remove the Screws
A uPVC window handle is an essential component of every home and is usually the first item to begin to show signs of wear and wear and tear or damage. This can be caused by natural factors or through regular use and sometimes even intentional damage caused by criminals who might want to open a closed window to gain access to your home. A simple fix can resolve the problem and prevent it from occurring again.
UPVC handles may also be difficult to open when the locking mechanism isn't working correctly. In most cases, the issue can be solved by replacing the multipoint lock, rather than the entire handle and it's definitely worth a look as it can save you money.
Once you've removed the old handle, you'll have to take off the screws that were that held it in place. The screws are typically located on the inside of the handle base. You may need to use an screwdriver to do this, and it's essential that you don't over tighten as this can cause the handle to become loose.
Then, you'll have to find the screws or pins that keep the handle in place. They will likely be located on the inside of the handle base and you will need to use a screwdriver or a pair of pliers in order to remove the screws. After you have removed them, you'll have to replace the caps on screws if you wish to do so and test the new handle to confirm that it's functioning properly.
Install the handle by aligning the spindle to the window's cutout mechanism. Then screw it in. Make sure that the handle is in the open position and that any screws are secured before replacing the screws' covers should you wish to do this. After this is done, you're done and can enjoy your newly replaced window handle. This should help you avoid expensive window and door replacements in the near future. If you would like assistance regarding this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Install the New Handle
The procedure of replacing a damaged window handle or updating it is easy and can be accomplished in a few easy steps. The key is to identify the type of handle, take measurements of its spindle and identify the tools you will need to complete the task. Always consider security when working with windows and tools. It's also important to take your time and follow the steps to ensure you have a working handle that is safe to use.
To begin, find the screws that hold your window handle. Take them off while firmly holding the handle to stop it from falling down and causing injury. Once the screws are removed, you can place them in a safe place to be replaced in the future.
After you have removed the handle, you can begin to install your new one. The handle should be perfectly positioned to function properly and keep the window in its closed position. The next step is to slide the metal square to the back of the handle into the hole of the window mechanism, ensuring that it fits securely.
Now that the new handle is in place, the last step is to replace the screw caps and check to see if it functions. If you're not happy with the results or the window doesn't shut or open properly, call our experts for assistance.
The majority of homes in the UK have uPVC windows. As so, a large number of them will have to be replaced at some point due to wear or breakage. The process is relatively straightforward and can be carried out by anyone with some knowledge of DIY. The most crucial aspect to the success of the procedure is ensuring that you're using a handle that matches the window's size and design. If you're unsure about what type of handle you require, don't hesitate to reach out to our team, who can provide you with the options available.